Conversor de sinal do receptor
$34.59
Especificação:
- Nome do item: receiver two-way signal converter
- Input voltage: 15-80V
- Y/W: 1500us±500us
- With hybrid control, electromagnetic brake/braking control
- Built-in 20A relay mechanical switch, can control electromagnetic brake coils of 3A and below
(Note: relay control inductive load current needs to be greater than 5-7 times)
Descrição:
– Item name: receiver two-way signal converter
2 types for your refer:
– HC-PWM_VS-KO (always open): When the throttle is in the middle, the mechanical switches of COM and Brake do not pull-in (used for the electromagnetic braking of power off brake)
– HC-PWM_VS-KC (always close): When the throttle is in the middle, the mechanical switches of COM and Brake are closed (which can be used as controllers for electrify brakes, electromagnetic brakes, or electronic brakes)
Signal control line:
– Black line: common negative pole
– Red line: output 5V (cannot be connected with other power supplies or overloaded)
– White signal line controls front and rear speed regulation
– Yellow signal line controls direction, and signal output that can turning in place or differential steering
With dual channel fine adjustment voltage function, remote control is more refined. 4-color indicator light.
(The default voltage for speed regulation is 0.9V~4.2V ±0.2, which can be measured and adjusted using a voltmeter)
IN: DC15V~80V (positive pole of input power supply, DC voltage range)
IN: DC- (Negative pole of input power supply)
GND/DC- (connected to the negative pole of speed regulation or reverse, and interlinked to the negative pole of power supply)
OUT: 4.2V L (left motor speed regulation)
OUT: 4.2V R (right motor speed regulation)
OUT: L-R L (left motor reverse line)
OUT: L-R R (right motor reverse line)
TJ-V-L (left side speed regulation voltage output micro adjustment)
TJ-V-R (right side speed regulation voltage output micro adjustment)
RD-DC (Red Light)
IN: Y-FX (yellow signal line, plug in the control direction channel)
IN: W-TX (white signal line, plug in control channel for advance and retreat)
OUT:+5V 0.2A (The red line outputs 5V to the receiver for use. If the receiver has other power supplies, this line needs to be disconnected to avoid mutual conflict and burning out)
GND/DC- (black line Common-)
Atenção:
The signal current output by the signal converter is small and cannot directly drive other loads.
O pacote inclui:
1pcs x signal converter
Informação adicional
Peso | Não aplicável |
---|---|
Dimensões | Não aplicável |
Tipo de produto | HC-PWM-VS-KC, HC-PWM-VS-KO |
Comentários
Ainda não há comentários.