30A Large Current Relay Switch

Features:
– Only 5V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the signal conversion module in the store should be added to the module.
– 1 channel servo signal input, control 2 way electronic switch
– 220V maximum controlled voltage
– Controlled end support 30A 250VAC/30VDC
– 2 outputs (only one relay can be operated at the same time)
– Compatible with remote control devices of all brands without calibration
– Three-stage switching channel / proportional channel control
– New LED indicator function

Application range:
– Remote control model rocket launch
– Remote control model smoke control
– Weapon system control like real machine
– Navigation control of the model aircraft
– Control of various remote switching systems

Functional description:
– The remote switch remotely controls up to 2 electrical devices on the aircraft model via a switch channel on the remote control
– This device does not require calibration and can be accurately compatible with remote control devices of various brands.
– This device is powered by the receiver and is completely isolated from external power supply, externally powered, and only supplied to the controlled device.

Typical application
1.Connect
Plug the signal input cable into the receiver’s three-stage switch channel or rocker channel, which corresponds to the remote control.
Connect the console switch to the device

2. Trigger
(Take the throttle passage as an example) Turn the throttle lever on the remote control to the full throttle, and a relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the throttle lever on the remote control to the half throttle, and the two relays are not closed (that is, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the throttle lever on the remote control to the minimum throttle and the other relay to close (that is, the common and normally open terminals are connected, and the common and normally closed ends are disconnected).

(Take the three-stage switch channel as an example) Turn the three-segment switch on the remote control to the high position, and one relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the three-segment switch on the remote control to the neutral position, and the two relays will not operate (ie, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the three-stage switch on the remote control to the low position, and the other relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected).

Package include:
1pcs x Relay Switch