1308 6000KV Outer-rotor Brushless Motor

Atenção:
Se precisar ajustar os parâmetros por conta própria, entre em contato com a equipe de atendimento ao cliente para obter o software oficial de ajuste de parâmetros do AM32. Não forneceremos serviço pós-venda se o ESC não funcionar corretamente devido ao uso inadequado de ferramentas de ajuste de parâmetros.

Nome do produto: outer-rotor brushless motor

Description for motor:
– Magnet: N52SH arc
– Stator size: ∅13xL8mm (0.51×0.31inch)
– Phase resistance: 100mΩ
– Overall dimension: ∅16.5xL17.4mm (0.65×0.69inch)
– Rated voltage: 2/3S (8/12V)
– Silicone wire: 24AWG 150mm
– Peak current: 18A (2S) / 22A (3S)
– Instantaneous maximum power: 144W (2S) / 264W (3S)
– No-load current (7.4V): 1.3A
– Weight (including wire): about 15g
– Special used for Micro RC Car, Mosquito Car

Description for AM32 ESC Ultra-mini :
– The latest 32-bit ESC, with super mini dimensions, is very suitable for compact installation and is a driving tool for various small model aircraft brushless motors.

– Easy to dissipate heat and powerful. Small body and high power, it is the preferred power source for small aircraft, crawler, climbing vehicles, and mosquito cars. Professional adaptation for small-scale climbing frame, mosquito car drift. Can be used for racing drift RWD.

- Suporta os principais sinais de controle, como DSHOT e PWM, com regulação linear em baixas velocidades, violenta em altas velocidades e suave da velocidade. Ele usa firmware de código aberto AM32, que pode ser ajustado livremente. É compatível com operação bidirecional, freio de arrasto ajustável, partida senoidal e outras funções, e a comutação rápida para frente e para trás é muito suave.

– Preset parameters, directly matching EMAX1106 6000kv motor. Or you can choose the motor in this link.

Specification of AM32 ESC ultra-mini:
– Item name: AM32 ESC (Ultra-mini)
- Firmware: AM32
– Firmware version: 2.16
– Master control: AT32F421 120MHz
– PCB: 2OZ+tin plating+2u gold plating
– BEC module: full 5V 3A
– Working voltage: 2-4S LIPO
– Natural heat dissipation output current: 30A
– Support offline configuration tool: SerialPortConnector
– Support online configuration tool: esc-configurator
– With LED power lights and switch pads
– Size: 25x12x5mm/0.98×0.470.19in
– Weight: about 2.1g (0.0046 pounds)

Altamente recomendado! Ao usar o ESC AM32, é necessário usá-lo em conjunto com um ajustador de parâmetros.

Ajustador de parâmetros:
- Porta tipo C
- Especial para ESC AM32 de 32 bits

Parameter adjustment instructions:
1. The 3P plug of the ESC, the white signal line corresponds to S, and the black BEC negative line corresponds to G, plug into the S and G of the parameter adjuster.
2. Plug the parameter adjuster into the USB port of the computer (win10 is recommended), and plug in the battery of the ESC.
3. In the FreelyRC product manual and tool library, download the parameter adjuster driver (win10 does not require installation), and the parameter adjustment software package Esc_Config_Tool_1.82 (unzip it without installation).
4. After ensuring that the parameter adjuster driver is normal (the CH340 serial port device is recognized in the device manager), open the unzipped parameter adjustment software folder and run “SerialPortConnector.exe”

5. Operate the software in the order shown below:
In step 2, select the COM number corresponding to the adjuster in the drop-down box.
Note: This COM number is different for each computer. You need to select the COM port corresponding to the tuner device on your computer.

6. Click the “Connect” button, and an “M1” button will appear in the software interface. Click “M1”.
7. Start parameter adjustment (example: bidirectional car, turn on FOC)
8. Press Save Settings to save the settings and then unplug the ESC.

4 types for your refer:
– motor: only 1pcs motor
– AM32 ESC ultra-mini: only 1pcs AM32 ESC
– motor with AM32 ESC: 1pcs motor + 1pcs AM32 ESC
– parameter adjuster: only 1pcs parameter adjuster

Observação:
- O tamanho é medido manualmente, e pode haver erros.

O pacote é opcional