2-6S 75A AM32/ESCape32 ESC

Introduction to ESCape32 ESC:
1. Firmware for 32-bit BLDC motor electronic speed controllers that aims for simplicity. It is designed to deliver smooth and efficient motor drive, fast transitions from a complete stop to full throttle, robust direction reversals, and maximum hardware support.
2. Used for brushless motors, the ESCape32 firmware is compatible even with brushed motors. Can be used for drone, crawler car, etc. RC models. Parameter adjustments should be made according to different usage scenarios.

3. Features:
– Support PWM, Oneshot125, automatic throttle calibration
– Support DSHOT 300/600/1200, bidirectional DSHOT, extended telemetry
– Support analog/serial/iBUS/SBUS/SBUS2/CRSF input mode
– Support KISS/iBUS/S.Port/CRSF telemetry
– Support DSHOT 3D mode, turtle mode, beacon, LED, programming
– Support sine startup mode, brushed mode, hybrid mode (sensored/sensorless)
– Support proportional brake, drag brake
– Support temperature/voltage/current/stall protection
– Support variable PWM frequency, active freewheeling
– Customizable startup music/sounds

– Supports AM32 firmware
– Supports ESCAPE32 firmware
– Enables mutual flashing between the above two firmwares
– Upgraded MOSFETs and PCB, with maximum current increased to 100A
– Optimized partial circuits for more stable ESC operation

4. Featured Functions:
– Supports brushed motors
– Supports sensored motors (requires hardware compatibility)
– Plug-and-play motor support (no need to input parameters like KV value)
– Support wireless WiFi parameter tuning

Descripción:
– Product name: AM32/ESCape32 ESC
– With telemetry feedback interface
– Size: 51.7×25.9×11.8mm (2.04×1.02×0.46inch)
– Cable length: about 100mm
– Wire gauge: 14AWG
– Weight: about 40.5g

Introduction to ESCape32 Command Line Tool:
– When the ESCape32 Wi-Fi LINK is unavailable, the AM32 parameter adjuster can also be used to adjust parameters and update the firmware of ESCape32 ESCs.
If possible, using the ESCape32 Wi-Fi LINK is recommended.
(After purchase, please contact customer service to obtain the specific parameter adjustment methods and firmware update procedures.)

Consejos:
– The hardware supports mutual migration between AM32 and ESCape32 firmware. Please contact our customer service personnel to obtain the operation methods and relevant files used in the migration process.
– If necessary, please contact our customer service personnel to obtain the ESCape32 CLI command instructions and the introduction to the ESCAPE32 command-line tool.

Specification of the Wi-Fi Link parameter adjuster:
– Size: 24x18mm (0.94×0.71inch)
– Cable length: about 87.8mm (3.46inch) (including the plug)
– Weight: about 4.9g

Nota: el tamaño es la medición manual, existen errores

El paquete es opcional:
1pcs x ESCape32 ESC (with cable)
o
1pcs x Wi-Fi Link