RC Simulierte Trillerpfeife Horn Sound Kit

The horn has two modes:
1. Remote control on/off: the remote control button is set to inching mode, press the third channel button (or turn it to one side) to sound, release the button to stop, and you can control the sound length at will. When the remote control button is set to self-locking mode, press it once to ring, and then press it again to stop.

2. The remote control will sound for about 6 seconds at a time: Press the third channel button (or turn the remote control switch) once, and the sound will stop automatically for about 6 seconds.

Anmerkung:
– The default mode is remote control on/off .
– If the mode needs to be switched, the setting method is as follows: the receiver is powered off, press and hold the hidden small button on the small module, do not let go, and release the small button after the receiver is powered on.(Switch position is indicated on the picture)
– The sound module is shown in the video, there is only ONE kind of voice.
– SP’s remote control + SP’s ESC may have problems and cannot be used. SP remote control + ordinary ESC can also be used

Remarks:
1. If the button channel of gun control is used, it is better to set it to inching mode. In inching mode, pressing the switch horn will sound, and releasing it will stop; If the horn sounds when it is powered on, press the switch and it will not sound. Please set the channel reverse direction.

2. In self-locking mode: press the switch horn once to sound, and then press the switch horn again to stop.

3. 2-section test toggle switch: turn it to one side to ring, and turn it to the other side to stop

Package includes:
1pcs x whistle sound unit